Tethys
Za narudžbu, provjeru cijena i raspoloživosti proizvoda molimo da nas kontaktirate.
Tethys: “ouverture”
Printer
Traceability of washing and disinfection cycles is an indispensable requirement as evidence that a process has been carried out correctly. The optional printer therefore becomes a useful accessory for saving data in print-out form.
Peristaltic pumps
Tethys washer-disinfectors are fitted with two peristaltic pumps, for controlled detergent and neutralizing additive dosage, and high- precision level sensors. This set-up ensures total repeatability, without the need for staff intervention.
Process management
Tethys washer-disinfectors are fitted with two high-precision temperature sensors for the management of the washing and disinfection cycles. The A0 parameter can also be checked in real time with the value shown on the display. If the machine is connected to a printer, this data is also printed on the report at the end of the cycle.
Door locking system
An automatically controlled electromagnetic device prevents the door being opened until a cycle has finished.
Thoroughdrying
The Tethys D60 model is fitted with a highly efficient forced-air load drier.
The system comprises an efficient hot air generator and powerful fan, which circulates purified hot air in the washing chamber, ensuring quality and sterility through the use of an absolute HEPA filter.
Steam condenser
The integrated steam condenser can swiftly eliminate the saturated steam generated inside the machine during the disinfection phase, so condensation cannot form during the cycle.
Dimensions
There are 45 cm (Tethys T45), and 60 cm (Tethys D60/T60) versions available, so these washer-disinfectors can be easily installed under a worktop, and will fit into various layouts in sterilization areas without difficulty.
Tethys: optional extras
Every professional environment is characterized by the type of instruments used in it and specific requirements concerning their handling. For this reason, Tethys washer-disinfectors have a wide range of accessories available, enabling an individual customized set-up in the washing room, in response to all the needs of the various medical sectors.
Washing of handpieces and cannulas
To meet the special need for injection washing and disinfection of hollow instruments, specific accessories are available, capable of both external washing and delicate, but thorough, washing of the internal ducts of handpieces, turbines and cannulas by forced injection of washing solution.
Containers and supports
A wide range of accessories to cater for the wide variety of demands and make best use of available space.
M7E200041 | Stainless steel basket with handles; dimensions 450 x 450 x 55 mm (5 x 5 mm mesh), available only for Tethys D60/T60 | |
M7E200042 | Stainless steel basket with handles; dimensions 435 x 160 x 50 mm (5 x 5 mm mesh) | |
M7E200043 | Stainless steel basket with handles and lid; dimensions 130 x 225 x 50 mm (3 x 3 mm mesh; lid 5 x 5 mm) | |
M7E200044 | Stainless steel basket with handles; dimensions 450 x 225 x 50 mm (5 x 5 mm mesh) | |
M7E200045 | Stainless steel basket with handles; dimensions 435 x 310 x 50 mm (5 x 5 mm mesh) | |
M7E200046 | Stainless steel basket with handles; dimensions 480 x 225 x 50 mm (5 x 5 mm mesh), available only for Tethys D60/T60 | |
M7E200047 | Stainless steel micro-mesh basket with lid, for small and/or thin instruments; dimensions 240 x 235 x 55 mm ( 2 x 2 mm mesh) | |
M7E200048 | Stainless steel micro-mesh basket with lid, for small and/or thin instruments; dimensions 100 x 80 x 45 mm ( 2 x 2 mm mesh) | |
M7E200049 | Stainless steel micro-mesh basket with lid, for small and/or thin instruments; dimensions 280 x 168 x 45 mm ( 2 x 2 mm mesh) | |
M7E200050 | Tall stainless steel basket with handles; dimensions 300 x 155 x 115 mm ( 3 x 3 mm mesh) | |
M7E200051 | Stainless steel support for 2 baskets / IMS unit; dimensions 415 x 130 x 150 mm; to be placed on upper trolley | |
M7E200052 | Stainless steel support for 3 basins/baskets/IMS unit; dimensions 300 x 130 x 145 mm, to be placed on lower trolley | |
M7E200053 | Stainless steel support for 8 tray covers; dimensions 385 x 310 x 115 mm | |
M7E200054 | Stainless steel support for 8 tray covers; dimensions 445 x 310 x 120 mm | |
M7E200055 | Stainless steel support for 6 IMS units / 12 IMS half-units; dimensions 445 x 230 x 155 mm | |
M7E200056 | Stainless steel support for 10 trays/containers; dimensions 440 x 170 x 175 mm, to be placed on lower trolley | |
M7E200057 | Stainless steel support for 11 trays; dimensions 335 x 305 x 115 mm | |
M7E200058 | Stainless steel support for 16 trays; dimensions 460 x 310 x 115 mm | |
M7E200059 | Stainless steel support for vertical instruments | |
M7E200060 | Stainless steel support for pliers; dimensions 305 x 150 x 135 mm, to be placed on upper trolley |
Special trolleys
Tethys thermo-disinfectors can be fitted with optional trolleys, designed for handling special devices.
Other accessories
The right answer is available for every need.
Teničke informacije
